Serving the Escondido area  ·  (760) 466-4180  ·  Open Mon-Sun 7am-7pm
📞 (760) 466-4180 Free Quote

Metal Roofing in Ramona, CA (92065) · Local Professionals

Escondido Metal Roofing · Fast response in Ramona and the Escondido area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+180Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Ramona is horse country, and it shows in the housing stock: ranch-style homes on acreage, manufactured houses on fenced lots, and older farmhouses along Main Street and the side roads off Highway 67. Lots are big, grades are uneven, and many roofs sit under oak canopies or out in full sun with nothing to block the wind.

Homeowners in Ramona (92065) call Escondido Metal Roofing because we understand rural roofs. We work on barns, shops, and ranch houses from Ramona Grasslands out toward the Barona Mesa area, and we know the difference between a city roof and a roof that has to handle embers, wind, and a well pump house next to it.

Metal Roofing in Ramona (92065)

Ramona sits higher and drier than the coast, with hot inland summers, fall Santa Ana winds, and wildfire exposure that never really goes away. Roofs here take UV all year, and the wind that comes over the hills can work fasteners loose and lift panel edges on barns and older ranch houses. The ground is often decomposed granite or clay, so drainage matters, and a roof that dumps water too close to a foundation or a horse paddock creates mud and erosion. Access can be tight on private lanes off Highland Valley Road or near the Ramona Airport, and some properties have gates, animals, or equipment that need to be moved before we start.

Our team has worked throughout Ramona and the greater Escondido area, from the ranches out on the mesa to the smaller homes closer to town. We handle stone-coated steel and standing seam for fire resistance, corrugated and ribbed panels for barns and shops, and repairs on the metal roofs that are already out here.

Our services in Ramona

How a Job Works in Ramona

Step 1: call us at (760) 466-4180 and we will set up a free on-site assessment. We look at the roof, the fasteners, the flashing, and how water drains off the property. If it is a repair, we tell you what failed and why. If it is a replacement, we measure and talk through panel profiles and colors that fit the house and the neighborhood.

Step 2: once you approve the scope, we handle the work. In Ramona that can mean coordinating around animals, gates, and gravel driveways, and pulling the right permit from the local building department. We keep the site organized and protect landscaping and parked equipment as much as possible.

Step 3: when the job is done, we clean up, haul away old material and fasteners, and walk the roof and the ground with you. We leave your property clean and show you what we did before we pack up.

Pricing in Ramona depends on the roof, the access, and the condition of the decking and flashing. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and full installation starts around $8 per square foot. Standing seam starts around $10 per square foot, and stone-coated steel or metal shingle roofing starts around $9 per square foot. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight repair starts around $600. Larger properties with steep grades, tight gates, or heavy tree cover can add to the labor, and storm damage work is inspected for free. Call (760) 466-4180 for a free estimate on your specific roof.

My ranch house off Highland Valley Road has an old corrugated metal roof with loose screws. Can you re-fasten it or does it need replacement?
We see a lot of that on Ramona acreage. If the panels are still sound and the leaks are coming from failed fasteners and worn washers, screw replacement and re-fastening often solves it. If the panels are thin, rusted through, or the seams are separating, replacement is usually the better long-term call. We inspect it for free and give you both numbers.
A Santa Ana wind event peeled back part of my barn roof near the Ramona Airport. How fast can you get out?
Call us at (760) 466-4180. We prioritize active leaks and wind damage, and we can often get out the same day or next day to secure the roof and prevent further water damage. We document the damage for your insurance claim and give you a repair estimate on site.
What does a metal roof cost for a typical three-bedroom ranch home in 92065?
For a standard ranch house, most homeowners are looking at roughly $8 to $12 per square foot installed depending on the material. A retrofit over existing shingles can start lower, around $7 per square foot, and standing seam is at the higher end. Size, roof pitch, access, and how much flashing and trim is needed all move the number. We give a firm written estimate after a free inspection.
Do I need a permit to replace my roof in Ramona, and who handles it?
Roof replacements generally require a permit, and the rules and inspection thresholds are set by the local building department. We pull the permit and coordinate the inspections as part of the job. You can also check with the City of Ramona website for general information about local departments and services before we start.
My neighbor's oak tree drops limbs on my roof and we are not sure where the property line is. What should I do before work starts?
We stay out of property line disputes, but we can tell you exactly where the roof work will happen and keep equipment on your side. If limbs are overhanging and causing damage, it is worth sorting out with your neighbor before we begin. For HOA properties, we can provide the panel profile and color information your architectural review committee will ask for.
Are you insured for work on a Ramona property with horses and barns?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Ramona's heat and wind?
Check the fasteners and washers once a year, especially after fall wind events, and keep gutters and valleys clear of oak leaves and debris. On older panel roofs, a coating can extend the life of the metal and reduce heat gain. We offer inspections and coating services, and it is cheaper to catch a loose screw than a leak.
Why choose us?

Trusted professionals in Escondido

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Escondido

All your work handled by qualified professionals in Escondido

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

180+ Verified Client Reviews in Escondido

⭐⭐⭐⭐⭐ 4.9/5 · 180 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Escondido · Response within 24h · No commitment · ☎ (760) 466-4180

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Escondido ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm